Prices on Mods

[Mustang_Scotty]

Guys I'm looking to get some mods done soon. Im trying to get prices from shops. Ford is ridiculious. Can you give me an idea what these things should cost. Ill get the parts. What should a dyno run cost. I would like to do the tune before and after run.

1. Gears =$$
2. Springs =$$
3. Dyno run=$$

[Johnny Dangerously]

Originally Posted by Mustang_Scotty

Guys I'm looking to get some mods done soon. Im trying to get prices from shops. Ford is ridiculious. Can you give me an idea what these things should cost. Ill get the parts. What should a dyno run cost. I would like to do the tune before and after run.

1. Gears =$$
2. Springs =$$
3. Dyno run=$$

BVM store.

PM Joe G with your list (include part numbers). We match prices in most cases.


`

[Mustang_Scotty]

I should of been clearer, im talking just install pricing.

[TOMMY GUN]

Originally Posted by Mustang_Scotty

Guys I'm looking to get some mods done soon. Im trying to get prices from shops. Ford is ridiculious. Can you give me an idea what these things should cost. Ill get the parts. What should a dyno run cost. I would like to do the tune before and after run.

1. Gears =$$
2. Springs =$$
3. Dyno run=$$

Gears can be $300-$500. Find someone who has done plenty of Ford gear set-ups. It's not that hard, but you want someone w/ experience.

Springs I don't know. You should get the car re-aligned afterwards though. Springs aren't that hard to do if you are mechanically inclined at all.

Dyno run just to check numbers is usually $50-$65 for 3 pulls. Doesn't include making a bunch of changes. Changes can cost $150 per hour.

Sometimes clubs get together for dyno days and you can get dyno runs cheap...like $25.

[Rags]

Originally Posted by TOMMY GUN

Gears can be $300-$500. Find someone who has done plenty of Ford gear set-ups. It's not that hard, but you want someone w/ experience.

Springs I don't know. You should get the car re-aligned afterwards though. Springs aren't that hard to do if you are mechanically inclined at all.

Dyno run just to check numbers is usually $50-$65 for 3 pulls. Doesn't include making a bunch of changes. Changes can cost $150 per hour.

Sometimes clubs get together for dyno days and you can get dyno runs cheap...like $25.

Replacing just the springs should cost you less than 2 hours labor.

[Super Snake]