FRPP CAI install instructions

[JonW]

Anyone have a diagram of where the mounting bracket goes for the FRPP CAI? Ford doesn't seem able to provide any instructions with their products.

[Johnny Dangerously]

Originally Posted by JonW

Anyone have a diagram of where the mounting bracket goes for the FRPP CAI? Ford doesn't seem able to provide any instructions with their products.

Jon,

Not sure if 6-Speed spells it out here or not.

http://www.stangmafia.com/forum/52762-post1.html


`

[JonW]

There was a link in his article that helped me out. Thanks.

[Boston Mike]

Originally Posted by JonW

Anyone have a diagram of where the mounting bracket goes for the FRPP CAI? Ford doesn't seem able to provide any instructions with their products.

getting her all buttoned down for the weekend??

[JonW]

Originally Posted by Boston Mike

getting her all buttoned down for the weekend??

Got it all installed. Going to flash the PCM tonight and I'll be ready to roll out.

[SLB8SNK]

Originally Posted by JonW

Got it all installed. Going to flash the PCM tonight and I'll be ready to roll out.

Sorry I missed this thread, but glad you got it all figured out. It was easy to install, and once you get the tune loaded... wohoooooo Good luck!

[Johnny Dangerously]

Originally Posted by JonW

There was a link in his article that helped me out. Thanks.

You're welcome.


`

[6-Speed]

Originally Posted by JonW

Anyone have a diagram of where the mounting bracket goes for the FRPP CAI? Ford doesn't seem able to provide any instructions with their products.

The instruction sheet for the TVS SC upgrade also includes steps for installing the CAI on pages 8 and 9 and then on 22 through 26. You can download a copy from the VMP Tuning website.

http://vmptuning.com/GT500/TVS/FRPPTVSINSTRUCTIONS.pdf

[JonW]

Just got back from Shelby Fest. Got the CAI and tune installed before I left. Not only do I have more power, and more blower whine, but I also logged 23.2 mpg on the stretch of I44 between Springfield and St. Louis. At 75 mph. Can't beat a deal like that.

[iceman]

That's nice! I am getting between 18-19 mostly on the highway at 75-80 on cruise. I get about 20mpg if I go 55-60 and about 19.4 at 65. Not bad all things considered...amazing what modern technology can do

[6-Speed]

Originally Posted by JonW

Anyone have a diagram of where the mounting bracket goes for the FRPP CAI? Ford doesn't seem able to provide any instructions with their products.

Just to wrap-up this thread; Ford Racing finally made the CAI instructions available for download.

http://www.fordracingparts.com/downl...9603-SVT07.pdf

[SLB8SNK]

Crazy question, but how would one confirm they had a tune loaded? Ok, let me explain, I had my dealer install and load for warranty purposes. So how would I determine it was actually loaded? yes it is faster, more PSI and louder blower, but is there a way to tell using the loader or something?

[6-Speed]

Originally Posted by SLB8SNK

Crazy question, but how would one confirm they had a tune loaded? Ok, let me explain, I had my dealer install and load for warranty purposes. So how would I determine it was actually loaded? yes it is faster, more PSI and louder blower, but is there a way to tell using the loader or something?

I'm not sure if you can directly read back which calibration is installed with the Procal II. But if you're really ambitious you can re-program the performance calibration and view/edit the configuration data through this menu. I did this several times while calibrating the speedometer for the correct tire size. I don't recall if there is a screen that indicates the performance calibration is already loaded while navigating through the various programming screens. Another possibility is to go through the motions of programming and view the configuations data - perhaps this by itself will indicate you have the performance calibration installed.






When you install the performance calibration, this display indicates the performance calibration is installed.

[SLB8SNK]

Originally Posted by 6-Speed

I'm not sure if you can directly read back which calibration is installed with the Procal II. But if you're really ambitious you can re-program the performance calibration and view/edit the configuration data through this menu. I did this several times while calibrating the speedometer for the correct tire size. I don't recall if there is a screen that indicates the performance calibration is already loaded while navigating through the various programming screens. Another possibility is to go through the motions of programming and view the configuations data - perhaps this by itself will indicate you have the performance calibration installed.






When you install the performance calibration, this display indicates the performance calibration is installed.

Thanks!