|
| Discussions: 7,741 | Messages: 266,020 | Members: 715 | Online: 81 | Newest : zeefree (Welcome to Stang Mafia!)
|
|
|||||||
|
||||
|
dynotech aluminum 3.5 takes the plate. i dont think the DSS one does but not sure...
__________________
![]() 306 of 8150 Coups 67 of 2250 Perform White 711RWHP 695RWTQ Plenty of mods....... ![]() It follows that as certain that night succeeds the day, that without a decisive naval force, we can do nothing definitive and with it, everything honorable and glorious - Circa 1781 G.W. |
|
||||
|
less turning weight mass...a little quicker in revs..
__________________
![]() 306 of 8150 Coups 67 of 2250 Perform White 711RWHP 695RWTQ Plenty of mods....... ![]() It follows that as certain that night succeeds the day, that without a decisive naval force, we can do nothing definitive and with it, everything honorable and glorious - Circa 1781 G.W. |
|
||||
|
To add to gr8snkbite's reply, There is also less chance of breakage with a one piece.
I went with the Dynotech one and no issues so far. I haven't been able to drive it alot but I am going on a 1,500 mile road trip later this week!
__________________
![]() 2008 Red Super Snake CSM # 08SS0067 TVS, 2.65 VMP upper pulley, L&M TB, L&M Plenum, 80lb FRPP Injectors, CJ MAF, DynoTech 3.5 DS, Revan Racing Radiator and Heat Exchanger, KR Mufflers, Custom Stereo 682 RWHP, 652 TQ |
|
||||
|
Randy - See PM I sent you. Also think abut the loop. I'd call it a must have with the DS.
DSS is only 17lbs but was not out when I got my Dynotech. No issues with it either as both are a lot lighter and stronger than stock. I'd not run with out a lop after seeing Harley dealers mess |
|
||||
|
Quote:
i have the shifter already, but a front loop would be ok
__________________
![]() 2008 ARREST ME RED COUPE STIEGEMEIER SNAKE BITE BLOWER C&L CAI /HID'S, J&M UCA AND LCA'S AMBIENT LIGHTING SAT RADIO # 777 OF 1367 RED COUPES 1 OF 1051 WITH WHITE STRIPES # 3627 OF 6513 COUPES |
|
||||
|
Is there an issue with the loops and putting the car on a hoist?
__________________
40th GT500 LXSSDRIVE A HYBRID - WE NEED YOUR GAS! CS Autograph - FRPP TVS, 2.65 Pulley, Tunes from Justin @ VMP, FRPP Handling Pak & 3.73's, Dynatech 1pc Alum DS, CS85, 86, & 87, Terlingua, Mustang Week |
|
||||
|
depends on the type of loop you have...may not clear the rear one if you have a one piece DS. i have the BMR loop and even after lowering the car, the DS cleared the loop by about 1/2 inch.
__________________
![]() 306 of 8150 Coups 67 of 2250 Perform White 711RWHP 695RWTQ Plenty of mods....... ![]() It follows that as certain that night succeeds the day, that without a decisive naval force, we can do nothing definitive and with it, everything honorable and glorious - Circa 1781 G.W. |
|
||||
|
did you decide on one yet....
__________________
![]() 306 of 8150 Coups 67 of 2250 Perform White 711RWHP 695RWTQ Plenty of mods....... ![]() It follows that as certain that night succeeds the day, that without a decisive naval force, we can do nothing definitive and with it, everything honorable and glorious - Circa 1781 G.W. |
|
||||
|
What plate are you all talking about?
I bought the Evo 3.5 (dynotech?) and it bolted on right out of the box. No problems whatsoever w/ BMR front and rear loops on lowered car. .
__________________
BVM Performance - where The Family shops for performance parts!! |
|
||||
|
Quote:
must be two versions then..the one i got had a plate to mount to the pinon first, then the shaft to it..
__________________
![]() 306 of 8150 Coups 67 of 2250 Perform White 711RWHP 695RWTQ Plenty of mods....... ![]() It follows that as certain that night succeeds the day, that without a decisive naval force, we can do nothing definitive and with it, everything honorable and glorious - Circa 1781 G.W. |
|
||||
|
Quote:
I had Keenan do mine, maybe it was in the box and I didn't know it? .
__________________
BVM Performance - where The Family shops for performance parts!! |
|
||||
|
oh..so YOU didnt just bolt it right in...its there...black in color. six bolt flange to the pinion, shaft to the adapter...
__________________
![]() 306 of 8150 Coups 67 of 2250 Perform White 711RWHP 695RWTQ Plenty of mods....... ![]() It follows that as certain that night succeeds the day, that without a decisive naval force, we can do nothing definitive and with it, everything honorable and glorious - Circa 1781 G.W. |
|
||||
|
Quote:
I guess I am a dufus. ![]() .
__________________
BVM Performance - where The Family shops for performance parts!! |
|
||||
|
nice new avatar
__________________
![]() 306 of 8150 Coups 67 of 2250 Perform White 711RWHP 695RWTQ Plenty of mods....... ![]() It follows that as certain that night succeeds the day, that without a decisive naval force, we can do nothing definitive and with it, everything honorable and glorious - Circa 1781 G.W. |
|
||||
|
Quote:
Steeda Driveshaft Safety Loop - '05-'09 Ford Mustang THE DRIVESHAFT SHOP I ordered direct from DSS and found out after it may be about $50 cheaper getting it through Evo...assuming it has the same warranty through Evo
__________________
![]() 2007 GT500 - Vista Blue/White Stripes 2.9 Whipple, 72# Injectors, BBK twin 65mm throttle body, Bassani headers, off-road x-pipe, off-road cats and full 3" exhaust, 08 damper, FRPP suspension, Steeda adj PH bar, DSS one piece driveshaft, Steeda driveshaft cage, FRPP 3.73 gears, Short throw shifter, Steeda carbon fiber cold air kit, Steeda control arms, FRPP coil covers, Diablo tuner After lowering pics now up Daily driver - 2009 F350 S/C 4x4 diesel Harley Davidson edition |
|
||||
|
Quote:
Randy got a heck of a deal through the BVM Performance store. MUCH less than by buying from the driveshaft shop direct - and it still has the standard mfgr's warranty. PM me if anyone wants a deal on these too. ![]() -
__________________
Proud owner of a 2007 GT500 Convertible - 853/859 Black verts produced, 2674/2695 verts produced - Black, white stripe - Red accent leather interior, Nav, Sirius, Premier Trim pkg, Car cover - Shelby signed dash plaque - Sequential taillights - JLT Red Carbon fiber CAI, Evo Stage 2 tune, 2.6 pulley - JLT Red CF Radiator support and fuse box covers - Revan/C&R radiator & HE - Corsa 14311 axle back exhaust ![]() ![]() BVM Performance - where The Family shops for performance parts!! |
|
||||
|
Quote:
HSURB®
__________________
|
![]() |
| Bookmarks |
| Tags |
| driveshaft |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Stock GT500 Driveshaft | TOMMY GUN | Parts Wanted/For Sale | 51 | 11-08-2009 12:45 PM |
| Aluminum Driveshaft YES or No? | JTB | Transmission /DS/Differential | 35 | 09-14-2009 08:31 PM |
| PROBLEMS WITH DRIVESHAFT HITTING TUNNEL | frydguy79 | Transmission /DS/Differential | 14 | 09-13-2009 01:31 PM |
| F/S BMR Front Driveshaft Loop | King Cobra | Parts Wanted/For Sale | 17 | 06-16-2009 08:56 AM |
| Stock Driveshaft HP question | Joker | Transmission /DS/Differential | 18 | 01-05-2009 12:20 PM |